At present, the quality ability of Yiming engraving machine have changed a lot. The number of Yiming engraving machines in the market is increasing. Of course, in the process of using precision carving machine, only according to its safety operation standard can we effectively ensure the normal work of Yiming CNC engraving milling machine.

Glass engraving machine belongs to precision numerical control machine tool. At the same time, it is also important to train the operators of glass engraving machine. After explaining the training personnel, evaluate the operators to ensure that the operators can operate skillfully, which is also a very important reason to ensure the processing effect.

So what are the environmental factors that affect the work of Yiming CNC engraving machine? Generally speaking, the surrounding power supply, vibration, environmental temperature humidity, dust lightning will affect the processing effect of glass engraving machine. The influence of power supply on machining is direct, mainly the disorder of control system. The electronic components functional components of the control system have a certain range of voltage frequency. The overload operation of any component will inevitably lead to the instability of the whole system.

Today, we introduce the basic points of glass engraving machine operation

1. Before using the glass engraving machine to check that the coolant is stored in the motor spindle cooler, turn on the motor spindle cooler to ensure that the coolant circulation is normal; open the positive pressure seal to avoid the waste coolant entering the motor spindle bearing.

2. When loading the card materials, it must be firm, it is forbidden to carve in the place the materials are suspended.

3. When installing the clamping tool, it is necessary to clean the impurities in the chuck, put the chuck into the gland, put the chuck into the motor spindle, then put the chuck into the chuck, then lock the gland. When the upper lower cutters loosen the gland, stop using the push-pull method the rotation method. When cutting the cutter, finish the scrap on the gland rotor, loosen the gland disassembly tool, then screw the gland pull the clamp.